1. The outer frame, fan blades, shutters, poles, and motor plates are all made of 304 stainless steel, which has the advantages of corrosion resistance and rust resistance;
2. The unique push-open shutter mechanism device can automatically open and close the shutter blades;
3. The stainless steel fan blade is formed by one-time stamping, which is not deformed or broken, beautiful and durable;
4. Recessed fan handling handle design. Not only can it effectively avoid the inconvenience during loading and unloading, but also will not affect the installation of the fan
5. The fan belt can be customized A-type or B-type belt according to customer requirements to meet the needs of different customers;
This product is widely used in livestock breeding, greenhouses, industrial and industrial plants and other places that require ventilation and cooling.
Model NO. | YNP-1380 |
Dimensions: height * width * thickness(mm) | 1380*1380*450 |
Blade Diameter (mm) | 1250 |
Motor speed (rpm) | 1400 |
Air volume (m³/h ) | 44000 |
Noise decibels(dB) | 75 |
Power(w) | 1100 |
Rated voltage(v) | 380 |
Model
|
Blade diameter (mm) |
Blade speed (r/min) |
Motor speed (r/min) |
Air volume (m³/h ) |
Total pressure(Pa) |
Noise (dB) |
Power (W)
|
Rated voltage (V) |
Height (mm) |
Width (mm) |
Thickness (mm) |
YNP-1000(36in) |
900 |
616 |
1400 |
30000 |
70 |
≤70 |
550 |
380 |
1000 |
1000 |
450 |
YNP-1100(40in) |
1000 |
600 |
1400 |
32500 |
70 |
≤70 |
750 |
380 |
1100 |
1100 |
450 |
YNP-1380(50in) |
1250 |
439 |
1400 |
44000 |
56 |
≤75 |
1100 |
380 |
1380 |
1380 |
450 |
YNP-1530(56in) |
1400 |
439 |
1400 |
55800 |
56 |
≤75 |
1500 |
380 |
1380 |
1380 |
450 |
1.When installing the fan, please make sure the fan is in the horizontal position, and it is recommended to use infrared level;
2.The inner side (protective net side) of the fan is flush with the inner wall to ensure that the drainage hole and removable maintenance board of the fan are on the outside of the outer wall, which is convenient for maintenance;
3.After the fan is placed in the hole, insert a wooden wedge into the gap above the middle column, and finally fill the gap with foaming agent ( not recommended to use concrete direct powder to prevent the extrusion deformation of the fan caused by the thermal expansion of the concrete which will affect the use);
4.In order to prevent the motor from burning out due to phase loss or overload, it is recommended to install breakers on the fan control circuit (Chint, Delixi, Schneider and other brands).
8618361802039
8618361802039